Description
Advanced Trainers Power Electronics
TRIGGERING CIRCUIT FOR BRIDGE RECTIFIER USING OP-AMP-780
Study of bridge rectifier using two SCRS The Gate of the SCRS can be triggered by using Industrial op-amp IC 780 By controlling the firing angle of the SCRS during each half cycle the duration of conduction of the SCR is varied and the DC output is controlled in accordance with the setting of the output voltage control.
Product Overview
The trigger pulses can be shifted within a phase angle between 0 and 180 This trainer comes with built in regulated power supply (i) + 12V/500mA (ii) 18V AC/500mA (iii) Step by step Instruction Manual (iv) Set of patching wires Mains : 230V mains operated Dimension : 27 x 17 x 5cms Casing : Mounted in a sloping FRP cabinet
Technical Specifications
| Mains : | 230V mains operated |
|---|---|
| Dimension : | 27 x 17 x 5cms |
| Casing : | Mounted in a sloping FRP cabinet |
Features and Details
- Study of bridge rectifier using two SCRS
- The Gate of the SCRS can be triggered by using Industrial op-amp IC 780
- By controlling the firing angle of the SCRS during each half cycle the duration of conduction of the SCR is varied and the DC output is controlled in accordance with the setting of the output voltage control.
- The trigger pulses can be shifted within a phase angle between 0 and 180
- This trainer comes with built in regulated power supply (i) + 12V/500mA (ii) 18V AC/500mA (iii) Step by step Instruction Manual (iv) Set of patching wires
About Interlabs
Interlabs, associated with International Biological Laboratories, supplies scientific, laboratory, educational and engineering equipment from India. The company identifies its history as dating to 1958. Contact Interlabs to confirm product details and supporting documentation for your requirement.
Request Product Information
Share your application and technical requirements for TRIGGERING CIRCUIT FOR BRIDGE RECTIFIER USING OP-AMP-780 to discuss suitability, available configurations and a quotation.
Frequently Asked Questions
What is TRIGGERING CIRCUIT FOR BRIDGE RECTIFIER USING OP-AMP-780 used for?
Study of bridge rectifier using two SCRS The Gate of the SCRS can be triggered by using Industrial op-amp IC 780 By controlling the firing angle of the SCRS during each half cycle the duration of conduction of the SCR is varied and the DC output is controlled in accordance with the setting of the output voltage control.
What should I confirm before ordering TRIGGERING CIRCUIT FOR BRIDGE RECTIFIER USING OP-AMP-780?
Confirm the intended application, technical specifications, available configuration, accessories, documentation and delivery requirements with Interlabs.
