Description
Metallurgy
Pyromatic Dry and Wet Linisher/Belt Surface-BSPIL
This system is used for rough polishing from 80 grit to 120 grit with the help of endless belt.
Product Overview
This gives a parallel surface to the specimen mounted in the mould. Metallography specimen can be conveniently finished by preliminary grinding without heat generation. Specifications Dimensions 400mm W, 255mm HT , 550 L Drive Single Drive capacity 0.25 hp a/c/ Motor 220 Volts with 50 HZ Water circulation pump SS sheathed fractional pump Output nozzle Flexible HDPE nozzle for effective alignment Continuous roller Bearing embedded AL.Alloy Rollers Roller belt dimension 100mm x 900 mm Aloxite or Silicon Carbon Wise Adjustable with Ring Valve Knob Electrical pane Illuminated Rocket Switch for Main Drive 1 NO Illuminated Rocket Switch for Water Circulation Finish Hammer tone enamel paint Mounting Table top Models Wet and dry model- with coolant pump BSPIL-MET-01004A – Dry model without coolant pump Mandatory Accessories and Consumables Aloxite/Silicon Cabide belt 100mm x 900 mm.
Technical Specifications
| Dimensions | 400mm W, 255mm HT , 550 L |
|---|---|
| Drive | Single |
| Drive capacity | 0.25 hp a/c/ Motor 220 Volts with 50 HZ |
| Water circulation pump | SS sheathed fractional pump |
| Output nozzle | Flexible HDPE nozzle for effective alignment |
| Continuous roller | Bearing embedded AL.Alloy Rollers |
| Roller belt dimension | 100mm x 900 mm Aloxite or Silicon Carbon |
| Wise | Adjustable with Ring Valve Knob |
| Electrical pane | Illuminated Rocket Switch for Main Drive 1 NO Illuminated Rocket Switch for Water Circulation |
| Finish | Hammer tone enamel paint |
| Mounting | Table top |
| Models | Wet and dry model- with coolant pump BSPIL-MET-01004A – Dry model without coolant pump |
About Interlabs
Interlabs, associated with International Biological Laboratories, supplies scientific, laboratory, educational and engineering equipment from India. The company identifies its history as dating to 1958. Contact Interlabs to confirm product details and supporting documentation for your requirement.
Request Product Information
Share your application and technical requirements for Pyromatic Dry and Wet Linisher/Belt Surface-BSPIL to discuss suitability, available configurations and a quotation.
Frequently Asked Questions
What is Pyromatic Dry and Wet Linisher/Belt Surface-BSPIL used for?
This system is used for rough polishing from 80 grit to 120 grit with the help of endless belt.
What should I confirm before ordering Pyromatic Dry and Wet Linisher/Belt Surface-BSPIL?
Confirm the intended application, technical specifications, available configuration, accessories, documentation and delivery requirements with Interlabs.
