Description
Laminar Air Flow
LAMINAR AIR FLOW (PRE FILTER ON TOP)
These are overhead clean air modules mounted on roof or with steel frame on the ground.
Product Overview
Units can be built with / without casters so the clean enclosure can be moved over equipment or used to isolate a controlled process. It is basically used for filling, refilling weighing and sampling/Dispensing of Raw Material, Basic Compounds, Active Compounds, works on the principal of laminar air flow with HPEA Filters & Pre-Filters. It provides:- This will act as a 100 Room.
Technical Specifications
| Standard Size (Working Area) | 2′ x 2′, 3′ x 2′, 4′ x 2′, 6′ x 2′, 8′ x 2′ |
|---|---|
| Air Velocity | 90 ? 20 cfm (Average) |
| Filtration Elements | Main Filters : HEPA Filter Prefilter: Washable non-woven polyester fibers. |
| Filter Efficiency | Main Filters : 99.97 at 0.3 micron Prefilter: Arrestance 90%, at 10 microns |
| Work | Stainless Steel |
| Noise Level | < 65 dBA |
| Light Intensity | 800-1000 Lux |
| Main Body | Wooden thick ply with wooden melamine. |
| Power Supply | 220V Single Phase, 50 Hz. |
Features and Details
- Wooden / wood melamine body.
- HEPA Filter
- Pre-Filter
- Blower (Motor Blower Assembly)
- U.V. Lamp
- Fluorescent Lamp
- Operating Switch
- Static Pressure Gauge (Manometer)
- Stainless Steel Table
- High quality HEPA filter provides protection for the product (filtration efficiency of more than 99.97% at 0.3 micron.
- Ultra-quiet noise level of not more than 65 dBA.
- Durable and easy to clean stainless steel work.
- Work area properly illuminated by diffused glare free fluorescent light.
- Cold rolled M.S. sheet body duly powder coated.
- Stainless Steel Body.
About Interlabs
Interlabs, associated with International Biological Laboratories, supplies scientific, laboratory, educational and engineering equipment from India. The company identifies its history as dating to 1958. Contact Interlabs to confirm product details and supporting documentation for your requirement.
Request Product Information
Share your application and technical requirements for LAMINAR AIR FLOW (PRE FILTER ON TOP) to discuss suitability, available configurations and a quotation.
Frequently Asked Questions
What is LAMINAR AIR FLOW (PRE FILTER ON TOP) used for?
These are overhead clean air modules mounted on roof or with steel frame on the ground.
What should I confirm before ordering LAMINAR AIR FLOW (PRE FILTER ON TOP)?
Confirm the intended application, technical specifications, available configuration, accessories, documentation and delivery requirements with Interlabs.
