| |
Click to Enlarge
|
HUMIDIFIER (AEROSOL DISINFECTOR)
Humidifier is specially designed to control humidity in areas where it is very essential. Its performance has been very well appreciated in pharmaceutical manufacturing units, storage rooms, processing units of avoid packing problems of snacks foods, printing industry, libraries, paper rooms, photographic industry, wood seasoning etc. See Enlarge
|
|
|
|
Click to Enlarge
|
DEHUMIDIFIER (Stainless Steel Body)
Designed to remove excess moisture from the atmosphere where manufacturing activities to Tablets, Capsules are performed. These are also useful to maintain the quality of precision equipment & instruments where accuracy is counted. It is having same Length & Breadth & 18" Height. Humidity is brought down up to 30% Accuracy ± 3% RH. Cooling is controlled by hermetically sealed unit. SIZE(approx): 25" x 25" x 40" CAPACITY: 1 TON , 1.5 TON , 2 TON See Enlarge
|
|
|
|
Click to Enlarge
|
ICE FLAKING MACHINE
An automatic Ice machine for your hygienic Ice flakes requirement in research laboratories, chemicals, pharmaceuticals, medical, biotechnological and hotel industries. The machine utilizes running tap water and converts it in the form of ice flakes continuously. It is a compact, self contained unit, covering less floor area & easily installable. Constructions:- Ice flaker is housed in styled M.S painted body with stainless steel made bin with no chances of corrosion. Ice crusher used is GERMAN CRUSHER made of S.S. to give life long performance. Water is introduced into crusher assembly through a precision float valve. The inflow of water is smoothly controlled by this float valve for maintaining a required level of water irrespective of variation in pressure at the water input line with automatic cut off in case of Low water / No water supply. Ice flakes are collected into a well-insulated/(PUF) stainless steel container. So it stays for longer time. The removal of flakes is easily possible through the stainless steel Top door which can be pushed while removing the ice. Moreover the equipment fitted with an ICE LEVEL CONTROLLER which will put off the system in case ice gets accumulated in the container more than the required level. Hence, there is no need of an operator being on the machine all the time. The ice controller is provided with a drain line for occasional cleaning of the container. | CAPACITY : | 40 - 45 KG PER DAY | | | 65 - 70 KG PER DAY | | | 90 - 100 KG PER DAY | | | 100 - 150 KG PER DAY | | | 250 - 300 KG PER DAY | | | OR Any Other Capacity As Per Requirement. |
See Enlarge
|
|
|
|
Click to Enlarge
|
HEATING MANTLE
Most suitable for labs, pharmaceuticals, chemicals glass plants etc. useful for heating inflammable liquids electric heating net is hard knitted from glass yarn (without any joint) and for durability & stands. Temperature up to 350ºC body of mantle is spun one piece from non rusting aluminium (duly stove/powder coated) Mantles are logged with special grade mineral wool. Most suitable to work on 220/30 volts A.C. supply. CAPACITY : -250 ml, 500 ml, 1000ml, 2000 ml, 3000ml, 5000 m See Enlarge
|
|
|
|
Click to Enlarge
|
HOT PLATES
(A) Hot Plate 8” Dia Round with Energy Regulator Control Deluxe quality with heavy cast iron base duly heat resistant painted. Rating 1.5 kw fitted with ER Control or thermostat controller, fibre blanket insulated with kanthal ISI heater & fire proof connection. i) With 3 heat switch ii) With E.R. Regulator OPTIONAL : DIGITAL TEMP. CONTROLLER See Enlarge
|
|
|
|
Click to Enlarge
|
HOT PLATES (RECTANGULAR) with Energy Regulator
Rectangular Hot Plate with outer M.S. sheet body duly powder coated or stove painted. To work on 220/230 volts A.C. supply useful for continuous heating up to 350ºC. Heavy duty Cast Iron , Ceramic Blanket Insulated with heat resistant paint. Size Available a) 10" x 12" x 6" (250x300x150mm) b) 16" x 10" x 6" (400x250x150mm) c) 18" x 24" x 6" (450x600x150mm) Available with Thermostat / Energy Regulator Controller & with Digital Temperature Controller. See Enlarge
|
|
|
|
Click to Enlarge
|
MAGNETIC STIRRER-CUM-HOT PLATE
Stainless Steel housing. Variable Stirring up to 1200 RPM Hot Plate temperature controlled by energy regulator. 1 Liter (Without Hot Plate) 1 Liter (With Hot Plate) 2 Liters (Without Hot Plate) 2 Liters (With Hot Plate) 5 Liter (Without Hot Plate) 5 Liters (With Hot Plate) See Enlarge
|
|
|
|
Click to Enlarge
|
VORTEX MIXER
WITH TOUCH AND WITHOUT TOUCH FACILITY See Enlarge
|
|
|
|
Click to Enlarge
|
HUMIDITY CABINET
CONSTRUCTION : - Double walled outer M.S. sheet duly powder coated. Inner Aluminium/Stainless Steel with 2/3 Nos. adjustable shelves duly perforated. Having heavy duty M.S. Stand. the door is an impressive structure having glass window & sealed by Rubber Gasket. Gap between the walls is filled with glass wool insulation. PANEL : - Consists of Temp. Controller i.e. by thermostat of Digitally controlled by Thermostat/Digital Humidity Controlled by imported humidistate placed inside the chamber. Supplied with Hygrometer to check exact Humidity inside the chamber. The Temperature is recorded on the "L" shaped thermometer fitted at the front of the cabinet. The water tank is provided at the bottom and the steam is circulated by water pump/motor fitted at the of the chamber. HUMIDITY RANGE : - Ambient to 95% ± 3%. TEMPERATURE RANGE : - Ambient to 40ºC/45ºC ± 2ºC. Suitable to work on 220/230 volts A.C. Supply. INSIDE CHAMBER SIZE | MADE OF STAINLESS STEEL / ALUMINIUM | No. of Trays | | 18" x 18" x 18" (450x450x450mm) | 2 | | 18" x 18" x 28" (450x450x700mm) | 3 | | 24" x 24" x 24" (605x605x605mm) | 3 | | 24" x 24" x 36" (605x605x900mm) | 4 |
OPTIONAL i) Digital Controller-cum-Controller. ii) Refrigerated Humidity can be made against requirement on all the size. Temp. 5ºC - 50ºC ± 0.5ºC.
See Enlarge
|
|
|
|
Click to Enlarge
|
WATER BATH (With Holes)
Rectangular Single wall made of S.S. 304 grade (Stainless Steel) Heating elements has an Automatic Cut of Device. Complete with concentric rings to work on 220/230 volts A.C. supply. See Enlarge
|
|
|
|
Click to Enlarge
|
WATER BATH (SEROLOGICAL)
Double walled outer casing made of M.S. sheet duly painted inner stainless steel 304 grade sheet. Temp. controlled by Hydraulic Thermostat from ambient to 95ºC ± 0.5ºC. The bath consist of 2 pilot lamps & on-off switch. To work on 220/230 volts A.C. Supply with ISI immersion heaters. Size of Inside Stainless Steel Tank a) 300x300x175mm (For 2 Racks) b) 325x300x175mm (For 4 Racks) c) 600x300x175mm (For 8 Racks) See Enlarge
|
|
|
|
Click to Enlarge
|
WATER BATH INCUBATOR SHAKER (Metabolic Shaking Incubator)
Temperature range from room temperature to 100ºC. Thermostatic control with an accuracy of ± 0.5ºC. Double walled inside made of stainless steel 304 Quality and outside Mild Steel sheet painted in epoxy powder coating. Oscillating tray is riding on ball rollers. Shaking speed range 40 to 140 rpm. Built-in L-shape thermometer. To work on 220/230 volts A.C. Supply. Without RPM Indicator. SHAKING TRAY SIZE: INSIDE (STAINLESS STEEL 304 QUALITY) | TI-1 | 275x275x75 mm. | 6 Ltrs. | | TI-2 | 275x275x150mm. | 12 Ltrs. | | TI-3 | 405x300x150mm | 18 Ltrs |
Shaking Rack made of stainless steel for TI-1 & TI-2 | To hold 16 Nos. 25ML | | | Conical Flask | | To hold 12 Nos. 50ML Conical Flask | | | Conical Flask | | To hold 9 Nos. 100ML Conical Flask | | | Conical Flask | | To hold 5 Nos. 250ML Conical Flask | | | Conical Flask | | To hold 4 Nos. 500ML Conical Flask | | | Conical Flask | | To hold 2 Nos. 1000ML Conical Flask | | | Conical Flask | | To hold 25 Nos. 25mm Conical Flask | | | Conical Flask |
Shaking Rack made of stainless steel for TI-3
| To hold | 20 Nos. | 25ML | Conical Flask | | To hold | 16 Nos. | 50ML | Conical Flask | | To hold | 12 Nos. | 100ML | Conical Flask | | To hold | 9 Nos. | 250ML | Conical Flask | | To hold | 6 Nos. | 500ML | Conical Flask | | To hold | 4 Nos. | 1000ML | Conical Flask | | To hold | 35 Nos. | 25mm | Conical Flask |
OPTIONAL:- 1) Electronic Digital Temperature Controller cum Indicator. 2) PID Controller having two ramp & two soak profile can be fitted in above instruments at an extra cost. See Enlarge
|
|
|
|
Click to Enlarge
|
SHAKING TRAY SIZE: INSIDE
TRAY MADE OF S.S. 304 QUALITY) (A) 275x275x75 mm. 6 Ltrs. (B) 275x275x150mm. 12 Ltrs. (C) 405x300x150mm 18 Ltrs See Enlarge
|
|
|
|
Click to Enlarge
|
WATER BATH HIGH PRECISION
Temperature range from ambient temperature to 100ºC. Temperature controlled by digital Electronic Controller-cum-Indicator with a sensitivity of ± 0.1ºC. Suitable for all laboratory applications requiring constant temperature with high degree accuracy. Double walled inside Stainless Steel and outside Mild steel sheet. A glass window is fixed on the front. Complete with stirrer, with speed regulator. Operates on 220/230 volts A.C. Supply. Size Inside Chamber (Stainless Steel 304 Quality) 430 x 230 x 265mm 28 Liters OPTIONAL:- 1) PID controller having two ramp & two soak profile can be fitted in above instruments at an extra cost of with sensitivity of ± 0.1ºC See Enlarge
|
|
|
|
Click to Enlarge
|
CIRCULATING WATER BATH FOR BUTYRO ABBE REFRACTOMETER
This water bath is used to circulate hot water in a particular area / instrument like B.R. Apparatus OR ABBE Refractometer Temperature is controlled by Thermostatically / Digital Temperature Controller , Inner Chamber SS-304, Outer MS duly powder quoted. See Enlarge
|
|
|
|