	ppm	Serum	Meq/l Urine
RANGE	Na : 0.1 to100 K : 0.1 to 100 Ca : 15 to 100 Li : 0.5 to 100	0.435-435 0.256 - 256 ------ 0.724-144.8	0.87-870 0.512-512 ------ ------
SENSITIVITY	0.1 ppm
ACCURACY	± 1 % up to 40 ppm ± 2 % above 40 ppm
READOUT	5 digit seven segment bright red LED display
FLAME SYSTEM	LPG & dry oil free air
DETECTOR	Photodiode
CALIBRATION	3 point calibration
POWER	230V ± 10% AC,50Hz
WEIGHT	8 Kg.(Approx)
AIR SUPPLY	By oil free mini compressor unit with pressure regulator
COMBUSTION GAS	LPG
ATOMISER	Axial flow type
BURNER	Stainless Steel
STANDARD ACCESSORIES	Sample Holder (5 No.s),Dust Cover, Main Lead, Chimney, Capillary tubes(3 No.s), Air and Gas Tubing along with End Clamps(1 Set),Cleaning Wire, Instruction Manual

See Enlarge

Click to Enlarge

Microprocessor Flame Photometer

FEATURES

Extremely useful for medical and agriculture laboratory use
All element measurement in single aspiration of the sample
Automatic Optical Management of filters
Calibration curve programmability using maximum of 5 standards.
Data processing through curve fitting techniques – least squares, quadratic
Multiple calibration curves saving facility
Samples data storage facility
Printer Attachment Facility
Measures in ppm, mg, % and meq
Help key available at each and every operating step

Specifications

Range	(ppm) Na: 0-100 K: 0-100 Ca: 0-100	(meq) Up to 250 meq/l, 1:100 dil Up to 250 meq/l, 1:100 dil Up to 250 meq/l, 1:100 dil
Sensitivity	Na:0.1ppm, K:0.01 ppm, Ca:0.5 ppm
Units	ppm, mg and % age Selectable
Filter Selection	Na & K and Ca by Microprocessor controlled stepper motor
Reproducibility	±1% of FS ± 1 Digits
Curve fit accuracy	± 2% of FS
Display	Large 20 x 4 Character LCD display with backklit
Aspiration time	4-5 Seconds
Flame system	LPG & Dry oil free air
Detector	Photodiode
Calibration	Up to 5 point calibration with curve fitting software
Gas Control	Adjustable with knob
Ignition system	Auto ignition
Fuel Gas	LPG
Burner	Stainiless Steel
Dimensions	365 X 245 X 220mm Approx. (LxBxH)
Printer	Provision for attachment of Dot-Matrix Printer or HP LaserJet / inkjet printer (non-win printers) with centronics parallel interface.
RS 232 interface	Available (PC software at extra cost)
Air Compressor	with Built-in Regulator and Air Filter to deliver stable and moisture/oil free air supply @ 1Kg/cm2
Air Supply	By oil free Mini Compressor Unit With Pressure Regulator
Weight	Main Unit : 8 Kg. (Approx) compressor : 6.5 kg. (Approx)
Power Supply	95 to 270V A 50-60Hz with inbuilt stabilizer
Accessories	Compressor with built-in air regulator and air filter to deliver stable and moisture free air supply @ 1Kg/cm22, 1mtr Capillary Tube, 2 mtr Gas Connector Tube, 0.5KVA Stabilizer already in-built in the system.

See Enlarge

Click to Enlarge

Microprocessor Flame Photometer

Rugged & accurate instrument to determine concentration of na, k, ca & li in any solution ideal instrument for clinical laboratories & soil testing labs.

FEATURES

Single Channel
Mixing Chamber designed for stable flame
Stainless steel round burner
Concentric Non-Corrosive Nebulizer
Narrow Band interference Filters
5 digit seven segment bright red LED display (1381)
2½ digit red LED display (381)

Specifications

RANGE	Na : 0-100 ppm K : 0-100 ppm Ca : 15-100 ppm (Optional) Li : 10-100 ppm (Optional)
SENSITIVITY	Sodium (Na) : 5 ppm Potassium (K) : 5 ppm Calcium (Ca) : 10 ppm (Optional) Lithium (Li) : 10 ppm (Optional)
READOUT	2 ½ digit bright red LED display
ACCURACY	± 2 % up to 40 ppm ± 5 % above 40 ppm
IGNITION SYSTEM	With external lgniter
DIMENSIONS	355W X 245H X 230Dmm (Approx.)
WEIGHT	7.5 Kg. (Approx.)
MEASUREMENT SYSTEM	Measures one element at a time
REPETABILITY	± 2 Counts
DETECTOR	Silicon Photodiode
FILTERS	Narrow band interference glass filters
NEBULIZER	Black bakelite, axial flow type
FLAME SYSTEM	LPG and dry oil free air
WARM UP TIME	10 minutes
POWER	230 V± 10%AC,50HZ
COMPRESSOR UNIT
AIR SUPPLY	By oil free mini compressor unit with pressure regulator
COMBUSTION GAS	LPG controlled by precision regulator
POWER	230V± 10%AC,50Hz
DIMENSION	275W X192H X 240D mm
WEIGHT	6.25 Kg. (Approx)
ACCESSORIES	instrument with Na & K Filters Sample Holders Instruction Manual Dust Cover Mains Lead Air and Gas Tubing along with End Clamps Chimney Capability Tubes *Cleaning Wires

See Enlarge

Click to Enlarge

Microprocessor Flame Photometer

Rugged & accurate instrument to determine concentration of na, k, ca & li in any solution ideal instrument for clinical laboratories & soil testing labs.

FEATURES

Dual Channel
Mixing Chamber designed for stable flame
Stainless steel round burner
Concentric Non-Corrosive Nebulizer
Narrow Band interference Filters
Dual 2½ digit red LED display

Specifications

RANGE	Sodium (Na) : Serum 0-200 meq/I : Urine 0-200 meq/I Lithium (Li) : Serum 0-2 meq/I (Optional) Potassium (K) : Serum 0-10 meq/I : Urine 0-100 meq/I Calcium (Ca) : Urine 0-10 meq/I (Optional)
READOUT	Dual 2 ½ digit bright red LED display
ACCURACY	± 2 % up to 100 meq ± 5 % above 100 meq
IGNITION SYSTEM	In-built electronic lgnition by press of a Knob
DIMENSIONS	275W X 192H X 240D mm(Approx.)
WEIGHT	10 kg. (Approx)
MEASUREMENT SYSTEM	Simultaneously measurement of 2 elements on dual LED display
REPEATABILITY	± 2 Counts
DETECTOR	Silicon Photodiode
FILTERS	Narrow band interference glass filters
NEBULIZER	Black bakelite, axial flow type
FLAME SYSTEM	LPG and dry oil free air
WARM UP TIME	10 minutes
POWER	230V ± 10%AC,50HZ
COMPRESSOR UNIT
AIR SUPPLY	By oil free mini compressor unit with pressure regulator
COMBUSTION GAS	LPG controlled by precision regulator
POWER	230V± %AC,50Hz
DIMENSION	275W X 192H X 240D mm (Approx.) 500W X 210H X 280D mm(Approx.)
WEIGHT	6.25 Kg.(Approx)
ACCESSORIES	instrument with Na & K Filters Sample Holders Instruction Manual Dust Cover Mains Lead Air and Gas Tubing along with End Clamps Chimney Capability Tubes *Cleaning Wires

See Enlarge

[1]

Go to Top