A range of readily available specially designed variable volume micro pipette are the ideal solution for laboratories carrying out routine repetitive pipetting with a high degree of accuracy and precision.

See Enlarge

Click to Enlarge

MICRO PIPETTE TIPS (LSE)

Moulded in polypropylene, specially designed for fixed & variable volume micro-pipettes.

See Enlarge

Click to Enlarge

PIPETTE STAND, VERTICAL (LSE)

This is a stable, non-corrosive, detachable Stand which can hold 28 pipettes with maximum dia 14mm. The heavy base measures 225mm in diameter and a Polypropylene coated square rod measuring 375mm in length is screwed into the base. The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.

See Enlarge

Click to Enlarge

PIPETTE STAND, ROTARY (LSE)

Moulded in Polypropylene, this unique stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protectively and permits water drops to runoff. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. This stand can be easily disassembled & reassembled.

See Enlarge

Click to Enlarge

PIPETTE STAND, HORIZONTAL (LSE)

Made of Wooden and can hold 12 pipettes horizontally

See Enlarge

Click to Enlarge

PIPETTE STAND, VERTICAL (LSE)

PIPETTE STAND, VERTICAL Wooden and polished, to hold vertically 24 pipettes of assorted sizes. Fitted with four rubber feet.

See Enlarge

1 2 3 4 5 6 7 8 9 10 11 12 13 [14] [«Back ]

Go to Top