| |
Click to Enlarge
|
Tripod Stand, Triangular
Flat triangular top. Side length 125mm. Height 200mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
Tripod Stand, Triangular
Mild Steel triangular top and legs. Legs bent outwards for stability. | | Top Side | Height | | -01 | 125mm | 150mm | | -02 | 125mm | 200mm |
See Enlarge
|
|
|
|
Click to Enlarge
|
Tripod Stand, Circular
Circular top. Legs bent outwards for stability. | | O.D. | I.D. | Height | | -01 | 80mm | 125mm | 200mm | | -02 | 110mm | 150mm | 200mm |
See Enlarge
|
|
|
|
Click to Enlarge
|
Alcohol Burner Stand
Ideal for use with alcohol burners. Made of nickel plated steel wire gauge. Height 125mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
Alcohol Burner, Aluminium
Made of die pressed aluminum. Comes with a wick and
screw on cap. Height 100mm approx. Capacity 60ml.
See Enlarge
|
|
|
|
Click to Enlarge
|
Alcohol Burner, Glass
Made of glass. Comes with a metal wick holder, wick and glass stopper. Height 100mm approx. Capacity 120ml.
See Enlarge
|
|
|
|
Click to Enlarge
|
Bunsen Burner
Nickel plated brass tube of 11mm diameter with rotatable air regulator and a riffled gas inlet tube of 9mm outer diameter mounted on heavy metal base. | -01 | Petrol Gas | | -02 | L.P. Gas |
See Enlarge
|
|
|
|
Click to Enlarge
|
Bunsen Burner, With Stopcock
Same as RC5022, but provided with a stopcock for gas regulation. | -01 | Petrol Gas | | -02 | L.P. Gas |
See Enlarge
|
|
|
|
Click to Enlarge
|
Meker Burner
Nickel plated brass tube with rotatable air regulator, perforated steel plate and riffled gas inlet tube 9mm outer diameter. Top diameter 25mm. Mounted on a heavy base. | -01 | Petrol Gas | | -02 | L.P. Gas |
See Enlarge
|
|
|
|
Click to Enlarge
|
Meker Burner, With Stopcock
Same as RC5024, but provided with a stopcock for gas regulation.
See Enlarge
|
|
|
|
Click to Enlarge
|
Rectangular Base
Cast iron base having hammertone paint finish, with hole for rod. Without rod. | | SIZE | | -01 | 15x10cm | | -02 | 20x12.5cm | | -03 | 22.5x15cm |
See Enlarge
|
|
|
|
Click to Enlarge
|
Tripod Base
Cast iron base having hammertone paint finish, with hole for rod. Without rod.
See Enlarge
|
|
|
|
Click to Enlarge
|
Support Rod
Plated steel rod, 13mm diameter, one end half round, other end threaded for fitting into bases. Provided with a through hole having a tommy bar for easy tightening of the rod. | | Length | | -01 | 500mm | | -02 | 600mm | | -03 | 750mm | | -04 | 900mm |
See Enlarge
|
|
|
|
Click to Enlarge
|
Extension Ring
Suitable for adjusting the ring from the support rod. Made from powder coated steel. | | I.D. | Length | | -01 | 50mm | 200mm | | -02 | 75mm | 255mm |
See Enlarge
|
|
|
|
Click to Enlarge
|
Ring, Retort
Cast iron, duly powder coated. Provided with a boss head to take rods up to 13mm diameter. The ring centre is 120mm from the support rod centre. | | I.D. | | -01 | 50mm | | -02 | 75mm | | -03 | 100mm | | -04 | 125mm |
See Enlarge
|
|
|
|
